Rms-technologies IMC17 INTEGRATED MOTOR CONTROLLER/DRIVER Manuel d'utilisateur télécharger pdf (Page 10)

RS232-485 converter card

(Figure 4)

1. The RS232 converter card connects to the IMC17 using the DB-9 cable that is

provided to you. Opposite the DB-9 cable is a 3-Pin connector which is placed

onto the converter card.

2. Your power supply will be connected to the RS232 card where the green

header is located. + is for +12-40VDC, - is for the Power Supply

Ground. The IMC17 must also be powered via Pin 1 (red wire for

Power) and Pin 6 (Green for Ground).

3. Connect the RS232 card to your PC with a male to female DB-9 cable.

4. Turn your power supply on and follow instructions for using HyperTerminal.

USB-485 converter card

RMS Technologies Page 10 4/3/2009

IMC17/IMCE17 User Manual Rev 1.06

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Pas de commentaire

Rms-technologies IMC17 INTEGRATED MOTOR CONTROLLER/DRIVER Manuel d'utilisateur Page 10