Rms-technologies R208 DRIVER Manuel d'utilisateur télécharger pdf (Page 5)

RMS Technologies Page 5 Version 1.22

R208 Microstepping Driver Manual 8/31/2007

1. FEATURES

• Bipolar Step Motor Driver

• Low Cost

• Small size 2.464” x 1.932” x .848” (62.59 x 49.07 x 21.54 mm)

• Selectable Step Resolutions of: Full Step, Half Step, 4x, 8x Microsteps

• Optically Isolated Step, Direction, and Disable/Enable Inputs

• Selection of holding current to be 23% or 100% of the run current

• Operates on +12 to +24 VDC

• Low Power Dissipation

• Efficient Current Control

• Thermal Shutdown, Under-voltage Protection

• Power-on Indicator

• Power Disable/Enable Control

• Sinusoidal current waveform

• Phase Current Range from 0.35 to 2.0 Amp

• Choice of reading each step input on the rising edge or falling edge of pulse

• Default Setting is 1.0 Amp RMS or, 1.4 Amp Peak*

* The default current can be preset at different values prior to shipping per customer’s

request

Automatic Current Cutback Feature

The R208 unit offers the user the option of using the Current Cutback function in the

form of a dip switch. The default setting is set to the Enabled position. This

means that when pulse input is discontinued, the driver will produce 23% of the Peak

running current. When this switch is set to the Disabled position, the driver will

produce 100% of the running current. To change the position of the Current Cutback

Switch, simply move the switch towards the “100” mark on the silk screen. This

indicates that it is using 100% of the run current. In other words, there is no

cutback to the current.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

Rms-technologies R208 DRIVER Manuel d'utilisateur Page 5